User's Manual

User Manual
Manual No. AMSL/DMR/UM/FD 009
Rev. 00 Effective Date 12.07.2022 Page | 42
5. Basic Operation
5.1 Preparing the Flat Panel Detector
This section describes how to prepare the flat panel detector.
5.1.1. Type of Flat Panel Detector
T4336RWC, T4336RWG
5.1.2. Number of the Connectable Flat Panel Detector
Up to 5 panels can connect to system at the same time.
5.1.3. Connecting/Disconnecting the Flat Panel Detector
Do not place the connector on floor.
Make sure that the latches on both sides are properly engaged when
connecting the connector. If the connector is inserted incompletely, the power may
turn off.