User's Manual

User Manual
Manual No. AMSL/DMR/UM/FD 009
Rev. 00 Effective Date 12.07.2022 Page | 35
4. System Configuration
4.1 How to Connect FPD
Allengers FPD can be operated either in wireless connection mode or
wired connection mode. When using wired mode, back-up cable is
necessary to provide the link from FPD to network switch hub or to PC.
User can also connect back-up cable to the adapter provided by Allengers
to give the power to operate or charging its battery. If the adapter is not
connected, FPD will be powered by its own battery.
Caution
Do not touch the back-up cable connector of X-ray Flat panel detector when
in wireless mode, otherwise it may
Result in electric shock or malfunction of the equipment.