User's Manual

User Manual
Manual No. AMSL/DMR/UM/FD 009
Rev. 00 Effective Date 12.07.2022 Page | 19
3.7 External Network Connection
Caution
When a setting of the network to which the equipment is connected has
been changed, check that the change does not affect the system operation
and take measures if necessary.
The setting change may include the following:
- Change of connection destination
- Addition of devices
- Removal of devices
- Update of devices
- Upgrade of devices
After connecting this system to the network with other systems, confirm that
the other systems are not affected. If they are affected, take
countermeasures such as network separation.
Warning
Make sure to use the optional parts, accessories and networks
recommended by us. Failure to use the optional parts, accessories and
networks recommended by us may result in damage to the equipment
and/or electric shock and injury.
Connect to the Ethernet Network of 100BASE-TX or 10BASE-T prescribed in
the IEEE standard 802.3. Do not connect telephone lines to LAN connector.
Only UTP-type straight LAN cables of 4-pair Category 5 cable (CAT 5E) or
higher are appropriate for connection to this connector. Compliant with FCC
part 15.
3.8 System Isolation Instructions
Warning
To ensure complete system isolation, never install any unauthorized