User's Manual

User Manual
Manual No. AMSL/DMR/UM/FD 009
Rev. 00 Effective Date 12.07.2022 Page | 17
Failure to use the optional parts and accessories recommended by us may
result in damage to the equipment and/or electric shock and injury.
Keep the equipment away from patient’s body fluids, chemicals, water, etc.
Otherwise, it may be damaged, causing fire or electric shock. If necessary,
protect the flat panel detector by covering it with a disposable bag.
3.4 Abnormalities Hazard
Warning
If any of the following occurs, immediately turn off the power of each unit,
unplug the power cable from the outlet, and then contact our official dealer
or Allengers Representative.
- When smoke, strange odor, or abnormal sound is present.
- When a foreign object (such as a metal object) or liquid enters the product.
- When the equipment is dropped or hit and is damaged.
3.5 Installation Precautions
Cautions
Do not install the equipment in a location with the following conditions:
- Where the temperature changes sharply.
- Close to heat sources such as a heater.
- Where the equipment may be exposed to water due to water leakage or
ingress.
- Where corrosive gas may be generated.
- Where there is excessive dust.
- Where the equipment is subject to frequent or excessive vibration/shock.
- Where the equipment is exposed to direct sunlight.
Use the equipment on a flat place. If the equipment falls, it may cause
damage to the equipment or personal injury.
When you move the equipment, place it in the cassette storage box of a
mobile X-ray unit or hold it by hand to prevent it from falling. If the cart is
used to move the equipment, place it horizontally.