User's Manual

User Manual
Manual No. AMSL/DMR/UM/FD 009
Rev. 00 Effective Date 12.07.2022 Page | 16
forcibly bend, or bundle the cable. Otherwise, fire or electric shock may result.
- Do not use the flat panel detector for the radiographic examination stand if its
cable becomes overloaded. Otherwise, the cable may be damaged, causing
fire or electric shock.
- Do not touch the back-up cable connector of detector; otherwise it may result
in electric shock or malfunction of the equipment.
- Do not attract any metal conductive objects to avoid short circuit, make sure
the back-up cable is clean
Do not use the equipment in a location where metal particles could come into
the equipment. This may cause an electric shock.
Do not disassemble or remodel the equipment. Otherwise, fire or electric
shock may result. Keep away from the parts inside the product, which may
cause electric shock. If you touch them accidentally, death or severe injury may
result.
Do not hit or drop the equipment or subject it to severe shock. Otherwise, the
equipment may be damaged. If the damaged equipment is used, fire or
electric shock may result.
Do not use the flat panel detector to lift up patient.
In addition, do not apply strong pressure onto the
flat panel detector. If applied, the flat panel
detector deforms and the waterproof function may
be invalid.
Have the patient take a fixed posture and do not let the patient touch parts
unnecessarily. If the patient touches connectors or switches, it may result in
electric shock or malfunction of the equipment.
Do not use the flat panel detector without the battery packs. If the battery
packs are not attached, an electric shock may result.
Make sure to use the optional parts and accessories provided by Allengers.