Technical data

1A
OPERATIONS
1.4 Service Safety
Poorly maintained equipment can become a safety hazard! In order for the equipment to operate safely and
properly over a long period of time, periodic maintenance and occasional repairs are necessary.
DO NOT attempt to clean or service machine while it is running. Rotating parts can cause severe injury.
DO NOT crank a flooded engine with the spark plug removed. Fuel trapped in the cylinder will squirt out the
spark plug opening.
DO NOT test for spark if engine is flooded or the smell of gasoline is present . A stray spark could ignite the
fumes.
DO NOT use gasoline or other types of fuels or flammable solvents to clean parts especially in
enclosed areas. Fumes from fuels and solvents can become explosive and can be hazardous to
your health.
ALWAYS operate machine with all safety devices and guards in place and in working order.
ALWAYS keep area around muffler free of debris such as leaves, paper, cartons, etc. A hot muffler could
ignite such items starting a fire.
ALWAYS replace worn or damaged components with spare parts designed and recommended by ALLEN
ENGINEERING.
ALWAYS disconnect battery on machines before servicing to avoid accidental start-up.
1.5 Dimensions
OPERATOR’S
RIGHT HAND
OPERATOR’S
LEFT HAND
41”
1041 mm
84”
2133 mm
52”
1320 mm
1A-8