Technical data

1A
OPERATIONS
1.3 Operating Safety
Familiarity and proper training are required for the safe operation of this equipment! Equipment operated
improperly or by untrained personnel can be dangerous! Read the operating instructions contained in both this
manual and the engine manual and familiarize yourself with the location and proper use of all controls.
Safety Precautions
1. Read operating and safety instructions before using the Riding Trowel. Operate the machine in
accordance with the manufacturer's instructions.
2. Inspect your Riding Trowel for damage or tampering that can sometimes occur
during shipping.
3. If damage is found file a claim with your carrier immediately! Mark freight bill of
lading as damaged shipment.
4. Do not operate Riding Trowel if any guards have been removed or if the "safety
switch" is not operational.
5. Only trained personnel should be allowed to operate your Riding Trowel.
6. Never allow more than one person on the Riding Trowel while it is in operation.
7. No foreign objects such as buckets, tools or materials should ever be attached or
allowed to ride on the Trowel during operation.
8. Do not attempt to fill fuel tank or oil sump while the engine is running. Allow engine to
cool before refueling.
9. Never attempt to operate the Riding Trowel on steep inclined surfaces.
10. Do not use over the counter hardware to replace manufacturer's hardware.
11. WARNING: When operating machines with gas engines in confined areas. The
fumes MUST
be ventilated!
12. Always wear safety goggles, ear protection, and gloves when operating the Riding
Trowel.
13. When operating Pro 900 Edger, never put hands on or near the edger rings. There are several
pinch point
decals loacted on the rings. Please adhere to the warnings to prevent serious injury.
1A-7