Technical data

OPERATIONS

THE INFORMATION CONTAINED IN THIS MANUAL WAS BASED UPON THE MACHINES

IN PRODUCTION AT THE TIME (BEGINNING WITH SERIAL NUMBER 9000402013) OF

PUBLICATION. ALLEN ENGINEERING RESERVES THE RIGHT TO CHANGE ANY POR-

TION OF THIS DOCUMENT WITHOUT NOTIFICATION.

Information Contained in This Manual

Ordering Parts

This manual contains an illustrated parts list for help in ordering replacement parts for your machine. Follow

the instructions listed below when ordering parts to ensure prompt and accurate delivery. All orders for parts

must be made through your local authorized Allen Engineering dealer. All authorized Allen Engineering deal-

ers must fax a copy of the parts order to customer service. The fax number is (870) 236-3934. Facsimile orders

must contain the following information:

1. On all orders for service parts include SERIAL NUMBER and MODEL number.

2. Shipment may be delayed if this information is not included.

3. Include correct description and part number from part section 2A.

4. State exact shipping instructions including preferred routing and complete destination

address. Also please indicate your preferred freight carrier. If no freight carrier is

indicated Allen Engineering reserves the right to ship the shipment the best way

possible. Once a shipment leaves Allen Engineering’s docks it becomes the

responsibility of the freight carrier to insure that it arrives at it’s intended

destination.

5. DO NOT return parts to Allen Engineering without receiving written authorized Returned

Goods Authorization (RGA) from Allen Engineering. All authorized returns must bee shipped

prepaid. All unauthorized returns will be shipped back to the addressee at their

expense.

Keep this manual or a copy of it with the machine. If you loose this manual or need an additional copy

please contact your Allen distributor or Allen Engineering Corporation at (800) 643-0095 and order lit-

erature part number 038958.

Change Without Prior Notice.

This manual provides information and procedures to safely operate and maintain the Allen Engineering PRO

900-NOL-SFC Model Razorback

Riding Trowels.

For your own safety and protection from personal injury carefully read, understand and observe the safety

instructions described in this manual.

Always operate and maintain this machine in accordance with the instructions described in this manual. A well

maintained piece of equipment will provide many years of trouble free operation. This manual is divided into the

sections listed below.

1A-5

OPERATIONS

PARTS