Technical data

OPERATIONS

1.21 Transporting Trowel

Optional dolly jacks are available for short moves or to

aid in servicing the trowel. Install dolly jacks as follows:

1. Inspect dolly jack for serviceability and damage.

2. Place riding trowel on firm level ground.

3. Tie steering levers (I) to frame to prevent them from

tipping forward when trowel is being lifted.

4. With the front dolly jack (J) Fully insert extension

tube in the holes (K) in the mainframe of the

riding trowel.

The front dolly jacks are equipped with short lifting

tubes while the rear dolly jacks have long

lifting tubes.

5. Insert the rear dolly jacks(L) with the long lifting

tubes into the holes provided in the rear of the

mainframe. The holes in the mainframe are located

directly opposite the front holes.

6. Turn jack handles clockwise to lift trowels and count-

er-clockwise to lower trowel.

CAUTION:

The dolly jack lifting system is designed for short moves

and to aid in servicing the trowel. It is not a substitute for

a towing system or trailer. An optional lifting bridle (M) is

available and recommended for lifting the trowel. Attach

the bridle to each of the four lifting eyes (N) on the trow-

el.

1A-17