Specifications
USA ONLY
CAUTION
Do not plug the instrument into any current source other than 110 to 120
volts, 50/60 Hertz alternating current (AC). A verified grounded outlet is
essential to proper operation and protection of the instrument. Proper polarity
should be checked with an AC circuit analyzer before connecting the organ.
Do not change the cable plug or remove the ground pin or connect with a
two-pole ground lift adapter.
If you are in doubt about your electrical connection, consult your local
electrician or power company.
In churches where circuit breakers are turned off between worship services,
the circuit breaker affecting the organ console AC power should have a guard
installed to prevent it from accidentally being switched off.
Read and comply with all instructions and labels that may be attached to the
instrument.
Warning
:
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause interference to radio communications. It has been type
tested and found to comply with the limits for a Class B Computing Device in
accordance with the specifications in Subpart J of Part 15 of FCC Rules, which
are designed to provide reasonable protection against such interference in a
residential installation. Should this equipment cause interference to radio
communications, the user at his own expense will be required to take
whatever measures may be necessary to correct the interference. Whether this
equipment actually causes the interference to radio communications can be
determined by turning the equipment off and on. The user is encouraged to
attempt to correct the interference by one or more of the following measures:
Reorient the receiving antenna.
Relocate the receiver with respect to the organ’s location.
Plug the organ into a different electrical outlet, so that the organ
and receiver are on different AC branch circuits.
If necessary, the Allen Organ dealer or an experienced radio technician should
be consulted for additional suggestions.
CE mark shows compliance with the EMC Directive