Installation Guide

CARE AND MAINTENANCE

• Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass.

Do not use an abrasive cleaner on glass or fixture.

• Total wattage for this item is 17 watts. Do not attempt to replace the LED.

OPERATING INSTRUCTIONS

TROUBLESHOOTING

WARNING: Before beginning work, shut off the power supply to avoid electrical shock.

Fuse blows out or

circuit breaker trips.

1. Crossed wires.

2. Power wire is grounding out.

1. Check wiring.

2. Check all connections.

1. Make sure power supply is ON.

2. Check wiring and all connections.

3. Contact customer service.

4. Cap sensor or wait until dark.

5. Remove sensor cap.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

Light does not come

on initially or no longer

comes on.

1. Power is OFF.

2. Faulty connection.

3. LED component is not

working properly.

4. Sensor is inactive.

5. Sensor cap is on.

This fixture can function with either the wall

switch or the preassembled dusk-to-dawn

sensor (D). To activate the dusk-to-dawn

capability, remove the sensor cap (E) from

sensor (D).

NOTE: For the fixture to work properly, the wall

switch to the fixture MUST be turned ON at ALL

times.