Installation Guide

6
ASSEMBLY INSTRUCTIONS
Attach mounting plate (B) to outlet box (not
included) using the existing washers and outlet
box screws or the machine screws (BB).
Note: If the outlet box screws required for your
outlet box are of a different size than the
machine screws (BB), consult with a licensed
electrician before proceeding.
Use level (not included) to make sure
preassembled screws (D) are level vertically.
This will help ensure the fixture (A) is level
when attached. Tighten machine screws (BB)
completely to secure mounting plate (B).
CAUTION: The fixture must be mounted to
an outlet box that is supported by the building
structure and can support the weight of the
fixture. Plastic outlet boxes are not
recommended.
Hardware Used
Machine Screw
x 2
BB
4.
Outlet Box
Washers
4
B
BB
BB
D