Installation Guide

READ AND SAVE THESE INSTRUCTIONS.

DANGER

• For your protection and safety, carefully read and understand the information provided in this manual

completely before attempting to assemble, install or operate this product. Failure to do so could lead

to electrical shock, fire or other injuries that could be hazardous or even fatal.

• If using this light fixture in a WET location, this light fixture must be connected to a supply circuit that

is protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury,

electrical shock or death.

• DO NOT connect this fixture to an electrical system that does not provide a means for equipment

grounding. Never use a fixture in a two-wire system that is not grounded. Installing a fixture into an

electrical system not having a proper grounding means could cause metal parts of the fixture to carry

electrical currents if any of the fixture wires, wire connections or splices were to become broken, cut

or loose during the mounting or normal operation of the fixture. Under this condition, anyone coming

in contact with the fixture would be subject to electrical shock, which could cause serious injury or

death.

• DO NOT connect the bare or green insulation fixture ground wire to the black (HOT) current-carrying

wire or the white (NEUTRAL) house wire. Connection of the bare or green fixture ground wire to the

black or white house wires may cause metal parts of the fixture to carry electrical currents. Under this

condition, anyone coming in contact with the fixture will receive electrical shock, which could cause

serious injury or death.

• DO NOT damage or cut the wire insulation (covering) during installation of fixture. DO NOT permit

wires to contact any surface having a sharp edge. To do so may damage or cut the wire insulation,

which could cause serious injury or death from electrical shock.

SAFETY INFORMATION

HARDWARE CONTENTS (shown actual size)

Wire

Connector

Qty. 3

Machine

Screw

Qty. 2