Installation Guide

10.
Install two 60-watt max. candelabra-base
incandescent bulbs (not included) or CFL/LED
equivalents.
CAUTION: When replacing bulb(s),
please allow bulb(s), fixture (A) and shade (G)
to cool down before touching them.
9
ASSEMBLY INSTRUCTIONS
12.
Restore power and test fixture (A).
If light does not function, please refer to
TROUBLESHOOTING on the following page.
12
A
11.
Align screw holes on shade (G) with holes on
fixture (A) and reinsert shade screws (H)
previously removed. Securely tighten both shade
screws (H).
10
Bulb
A
11
A
H
H
G