Installation Guide

7
ASSEMBLY INSTRUCTIONS
6a.
Hardware Used
Wire Connector x 3
Unwrap BARE wire from BLACK and WHITE
wires on back of fixture (A). Prepare wire by
stripping 1/2 inch of insulation from wire ends
using wire strippers (not included).
Connect BARE/GREEN ground wire from
outlet box to BARE ground wire from fixture (A)
using wire connector (AA). Connect WHITE
wire from fixture (A) to WHITE wire from outlet
box using existing wire connector or wire
connector (AA). Connect BLACK wire from
fixture (A) to BLACK wire from outlet box using
existing wire connector or wire connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire,
electrical shock, or personal injury, wire
connectors (AA) provided with this light fixture
are designed to accept only one 12-gauge
house wire and two lead wires from the light
fixture. If your house wire is larger than
12-gauge or there is more than one house wire
to connect to the corresponding fixture lead
wires, consult an electrician for the proper size
wire connectors to use.
AA
6b.
4
4
6a
6b
Outlet Box
WHITE WHITE
BLACK
BARE/
GREEN
BLACK
AA
AA
AA
BARE