Installation Guide

6 7

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

5. Remove the paper from the preassembled adhesive

tape on each side mirror bracket (JJ), then carefully

attach side mirrors (B) to each side of cabinet (C).

Hardware Used

6. Install the glass shelves (E) to the desired positions

with shelf clips (BB), making sure they are level.

Shelf Clip

x 12

第 6 页第 7 页

Hardware Used

4. Attach side mirror brackets (JJ) to cabinet (C)

where shown (on both sides) with short screws (AA)

and washers (EE), then snap caps (DD) to cover the

screw heads.

Short Screw

Snap Cap

Washer

Side Mirror Bracket

x 4

Lowes.com/allenandroth

Hardware Used

3a. For drywall installations: With the assistance of

another person, install the top clips (II) by inserting the

rounded ends into the rear top slot of cabinet (C).Slide

one top clip (II) to the left and one to the right, then

secure using long screws (GG) through the top clips (II)

and directly into the wall studs.

3b. For solid wall installations: With the assistance

of another person, install the top clips (II) by inserting

the rounded ends into the rear top slot of cabinet

right, then mark locations with a pencil. Temporarily

move top clips (II) out of position, then use a 5/16-in.

drill bit (not included) and drill a pilot hole at marked

locations. Move top clips (II) back into position and

insert wall anchors (HH) into holes, then insert

long screws (GG) through top clip (II) and into wall

anchors (HH).

Top Clip

Long Screw

x 2

Wall Anchor

x 2