Installation Guide

ASSEMBLY INSTRUCTIONS
7
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Outlet Box
7
7.
AA
AA
AA
Carefully arrange excess wiring and wire
connectors (AA) within canopy on fixture (A).
Align holes in canopy of fixture (A) with screws
(C) on mounting plate (B) and push up. Secure
fixture (A) to mounting plate (B) with decorative
nuts (E) previously removed (Step 3, page 5).
Outlet Box
8
Install three standard-base bulbs (not included).
Use 60-watt max. incandescent bulbs or CFL
equivalent.
IMPORTANT: To reduce glare, the use of
frosted bulbs is recommended.
CAUTION: When replacing bulbs, please
allow bulbs and glass shades to cool down
before touching.
8.
9.
B
A
AA
C
9
Bulb
(representative only)
A
A
E
E