Installation Guide

7
8
Attach mounting plate (B) to outlet box
(not included) using existing washers and
outlet box screws or the machine screws
(BB). NOTE: If the outlet box screws
required for your outlet box are of a different
size than the machine screws (BB), consult
a licensed electrician before proceeding.
Tighten machine screws (BB) to secure
mounting plate (B). Push plastic washer (E)
into mounting plate (B).
CAUTION: Make sure the outlet box
can support 35 lbs. hanging weight. Use
metal outlet box; plastic outlet boxes are not
recommended.
8.
Hardware Used
Machine Screw
x 2
BB
BB
A
B
E
9
ASSEMBLY INSTRUCTIONS
9.
Hang fixture (A) using the slots on the back of
fixture (A).
Slot
A