Installation Guide

3. Carefully fit the post fitter on the fixture body (D)
over the end of the post (not supplied), making
sure the post fitter is fully seated. Mark the drill
point for the 3 mounting screws using 3 mounting
holes as reference. After marking hole locations,
remove fixture from post and drill 1/16 in. pilot holes
for screws.
3
Post
Post Fitter
4
ASSEMBLY INSTRUCTIONS
1. Thread the beaded end of the center stem (C)
into the mounting hole on the top center of the
junction box inside of fixture body (D). Hand
tighten until snug.
1
2. Place the shade (B) into the fixture body (D).
2
Mounting
Hole
C
D
D
D
B
Lowes.com/allenandroth