Installation Guide

ASSEMBLY INSTRUCTIONS
6
Lowes.com/allenandroth
CARE AND MAINTENANCE
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives
to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Bulbs will not light. 1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Fuse blows or the
circuit breaker trips
when light is turned
on.
Crossed wires or power wire is
grounding out.
Check wire connection.
II
Bolt
66
6
6. Place the shade (B) inside the cage (C). Lift the
assembly upward, placing the preassembled
bolts in the cage (C) into the slots on each side
of the ceiling canopy (A). Rotate the assembly
until it is engaged in the slots.
A
B
C