Installation Guide

4
ASSEMBLY INSTRUCTIONS
1.
Secure the crossbar assembly (CC) to the outlet
box (not included) with outlet box screws (BB).
Note: The preassembled screws on the crossbar
assembly (CC) should protrude away from the
outlet box.
x 2
Hardware Used
Outlet Box
Screw
x 1
1
Outlet
Box
Crossbar
Assembly
Lowes.com/allenandroth
2. Remove the preassembled lock balls from crossbar
assembly (CC). Temporarily attach the ceiling
canopy (A) to the preassembled screws on the
crossbar assembly (CC), securing with lock balls. If
the ceiling canopy (A) is not snug against the ceiling,
remove it from the crossbar assembly (CC) and
adjust the length of the preassembled screws by
unscrewing the preassembled hex nuts. Screw the
screws in or out of the crossbar until the correct
length is achieved, then re-attach the ceiling canopy
(A).
Once the ceiling canopy (A) is secure, remove lock
ball and ceiling canopy (A).
Mounting
Screw
CC
BB
BB
CC
662
A
A
Lock Ball
Hex Nut
Outlet
Box