Installation Guide

5
ASSEMBLY INSTRUCTIONS
DD
3. Thread another hex nut (DD) to the other end
of the short nipple (HH) just enough so the
inside surface of the ceiling canopy (C) rests
against it.
Hardware Used
Hardware Used
4. Attach ground fixture wire to either the green
ground screw (AA) on crossbar (A) or to the
ground wire in the outlet box (usually GREEN
or BARE). If attaching fixture ground wire to
the crossbar, it is imperative that the outlet
box in your home be properly grounded.
Connect the neutral WHITE or RIBBED side
fixture wire to the neutral usually WHITE wire
from the outlet box. Connect the hot BLACK
or SMOOTH side fixture wire to the hot usually
BLACK wire from the outlet box. Joignez les
fils à l’aide d’un capuchon de connexion (BB)
en plastique et enroulez ce dernier de ruban
isolant (non inclus) bien serré.
3
4
Outlet
Box
C
HH
AA
x 1
Green
Ground
Screw
White Wire
From Outlet Box
Black Wire
From Outlet Box
Bare, or Green
Ground Wire
Bare, or Green
Fixture Ground Wire
From Outlet Box
Bare, or Green
Ground Wire
From Outlet Box
White or
Ribbed Side
From Fixture
From Fixture
Black or
Smooth Side
OR
AA
BB
BB
x 3
Wire
Connector
DD
x 1
DD
Hex Nut
Lowes.com/allenandroth