Use and Care Guide

ASSEMBLY INSTRUCTIONS

1. Put the table top rim (A) upside down on a

soft surface such as carpet. Attach table leg

(B) to table top rim (A) using bolt (AA) and

washer (BB). Don’t tighten the bolts. Repeat

for the remaining legs.

2. Attach table leg (B) to connector (D) using bolt

(AA) and washer (BB). Don’t tighten the bolts.

Repeat the above step for the remaining legs.

Check alignment of all hardware and make

corrections if necessary. Fasten all bolts tightly

with hex wrench (DD). Cover all bolts with bolt

covers (CC). Put the aluminum panel (C) on the

table top rim (A).

• Read these instructions carefully before assembly.

• It takes two people to assemble this product.

• Paint on this furniture might peel if it is not handled properly. Handle with care.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and hardware contents list. If any part is missing or damaged, do not

attempt to assemble the product.

Estimated Assembly Time: 20 minutes

Tools Required for Assembly: Hex Wrench (provided)

SAFETY INFORMATION

Hardware Used

Bolt (1/4 in. - 20 x 0.591 in. L)

Washer

x 12

Hardware Used

Bolt (1/4 in. - 20 x 0.591 in. L)

Washer

Bolt Cover

Hex Wrench

x 4

x 16

x 1

Lowes.com/allenandroth