Installation Guide

CARE AND MAINTENANCE

4. Assemble the woven back panel (D) to

the right arm (A) and right arm (B) by inserting

long bolt (BB) and washer (CC). Check

alignment of all hardware and make

corrections if necessary. Fasten all bolts

tightly with hex wrench (EE).

Cover all bolts with bolt covers (DD).

Hardware Used

Washer

x 2

x 6

x 2

Long Bolt (1/4 in. - 20

x 2.165 in. L)

Hex Wrench

Bolt Cover

x 1

CCBBDD

Clean frame with a solution of warm water and mild soap. Dry completely. Do not use bleach

or solvents. Use a ﬁne automotive wax to maintain gloss on non-textured ﬁnishes.

•

The ﬁnish on furniture is formulated and baked on to make it highly resistant to repellents and

lotions. However, to avoid discoloration, clean the frame as soon as possible after exposure.

prevent mildew by washing out dirt particles that may become trapped. Shake out excess

moisture after rinsing and allow to dry thoroughly before storing.

• For best results, clean weave regularly with mild detergent and warm water. Cleaning will help

• Paint on this furniture might peel if it is not handled properly. Handle with care.

3. Insert the woven back panel (D) into the

seat (C).

Insert

Lowes.com/allenandroth