Installation Guide

10.
10
A
CC
C
Raise the canopy (A) up to the outlet box, passing
it over the preassembled nipple on mounting
bracket assembly (CC). Attach previously removed
decorative nut (C) to secure canopy (A).
Note: If the canopy (A) is not flush with the ceiling,
you may need to adjust the preassembled nipple
on mounting bracket assembly (CC) using the
preassembled hex nut.
Manual nut
7
Lowes.com/allenandroth
®
11a.
11a
K
I
J
11b.
11b
K
I
J
If you need to replace glass shade assemblies (J),
hold the fixture cup (I) with one hand and loosen the
retaining ring (K) counterclockwise with the other
hand. Remove retaining ring (K) and glass shade
assembly (J) from fixture cup (I).
Attach glass shade assembly replacement part
to fixture cup (I) with previously removed retaining
ring (K).
Note: If fixture cup (I) is loose, tighten the
preassembled manual nut with flathead screwdriver
(not included).
Assembly is now complete.