Installation Guide

Lowes.com/allenandroth

Hex nut

Add the necessary 3 in. rods (E), 6 in. rods (F)

and 12 in. rods (G) to assembly to achieve desired

fixture length. Before connecting any of the rods

together, be sure to feed LED wires (D) through

each added section.

Note: The length of the rod assemblies must be

the same on each side, and you must leave at

least 6 in. of LED wire (D) on each side to ensure

proper installation to the outlet box.

Feed LED wires (D) up through the previously

assembled threaded tube assemblies (B) and

canopy (A).

Place the canopy (A) and threaded tube assemblies

(B) on to the top of rod assemblies. Use pliers (not

included) to rotate preassembled hex nuts clockwise,

tightening the threaded tube assemblies (B) to the

rod assemblies.