welcoming MODEL NUMBER 1116VA-48-242-905 1116VA-48-242-901 1116VA-48-201-905 1116VA-48-201-901 1116VA-48-201-900 • sophisticated • inspiring DESCRIPTION SL WRSVL LT GRY 48-IN VTY TZO TOP SL WRSVL LT GRY 48-IN VTY WHT TOP SL WRITSVLE WH 48-IN VTY TZO TOP SL WRITSVLE WH 48-IN VTY WHT TOP SL WRITSVLE WH 48-IN VTY MBL TOP 48-IN VANITY WITH TOP ITEM #1028305; 1028304; 1028294; 1028293; 1028292 MODEL #1116VA-48-242-905; 1116VA-48-242-901; 1116VA-48-201-905; 1116VA-48-201-901; 1116VA-48-201-900 ATTACH YOU
TABLE OF CONTENTS Package Contents...........................................................................................................................3 Hardware Contents..........................................................................................................................3 Safety Information............................................................................................................................3 Preparation.........................................................
PACKAGE CONTENTS PART A B C D DESCRIPTION Vanity Top Backsplash Sink E Left Door (preassembled to Vanity (A)) 1 Right Door (preassembled to Vanity (A)) 1 F QUANTITY CARTON 1 Box 2 of 2 1 Box 1 of 2 1 1 C D B Box 2 of 2 F A E HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE) AA BB CC DD EE FF Bolt Qty. 4 Sink Bracket Qty. 4 Nut Qty. 4 Lock Washer Qty. 4 Wrench Qty. 1 Touch Up Pen Qty.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry). Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone caulk, power drill with drill bit, measuring tape, level.
INSTALLATION INSTRUCTIONS 2. Take out the top (B) and backsplash (C) according to the steps indicated by the drawings on the right, and place them face down onto a scratch free surface such as a foam sheet that came in the packaging.
INSTALLATION INSTRUCTIONS 4. Screw bolts (AA) into the threaded holes of stone top (B). 4 AA D Hardware Used AA Bolt 5. Lower the sink brackets (BB) over the bolts (AA) and allow to rest on the sink lip. Adjust location of bracket to firmly grasp sink lip. Lower lock washers (DD) over bolts (AA) and secure with nuts (CC). Hand tighten nuts (CC) with included wrench (EE).
INSTALLATION INSTRUCTIONS Helpful tip: it may be easier to install your choice of faucet (not included) before securing the vanity top (B) to vanity base (A). 6 6. To install the stone top with assembled sink to the vanity (A). Apply silicone caulk to the top edge of the wood cabinet. With the help of another adult, gently lower the stone top with assembled sink onto the cabinet.
INSTALLATION INSTRUCTIONS 8. If you need to adjust the doors, do so in the following manner. To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws. To adjust door left or right, turn screws (b) on both hinges, in and out. To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws. 8 2 2 2 2 2 2 a 1 a 3 1 1 b 9.
INSTALLATION INSTRUCTIONS 10. To re-install drawers into vanity (A). Please fully extend metal glide tracks, gently lower and slide drawer box into rear glide catch, then, lower drawer box down to completely rest on extended glides, push plastic levers to lock the drawer box in place. Repeat for remaining drawers. Note: To Adjust the drawer box height. Please spin the adjustment wheel to the left to raise the drawer box or spin the adjustment wheel to the right to lower the drawer box.
CARE AND MAINTENANCE • Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product. • You can clean the vanity with a gentle, non-abrasive household cleaner. • Make sure to dry the wood immediately with a soft cloth or towel. • The ceramic sink can be cleaned using standard ceramic cleaning agents available at your local supplier. • Tips for using touch-up pen (FF): For scratches, stroke in direction of scratch; for worn areas, stroke in direction of wood grain.
REPLACEMENT PARTS LIST FOR 1116VA-48-201 For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.
REPLACEMENT PARTS LIST FOR 1116VA-48-242 For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.
