Dimensions Guide

4
INSTALLATION INSTRUCTIONS
A
B
2
A
Note: Clean area where the vanity (A) will be
permanently located prior to beginning
installation, ensuring the vanity (A) will not
interfere with any water supply and drain
lines once mounted.
2. With two people, carefully place vanity (A) with
top (B) against the wall in its
location.
Find and mark locations of wall studs behind
the permanent location of vanity (A).
Note: Use preassembled levelers on legs of
vanity (A) to level the item. Twisting the
levelers counterclockwise will increase the
height of vanity (A), twisting them clockwise
will decrease it.
WARNING
Vanity (A) MUST be secured to wall.
3. To reinstall drawers into vanity (A), fully
extend metal glide tracks. Gently lower and
slide drawer box into rear glide catch. Next
lower drawer box down to completely rest on
extended glides. Then, push back in the left
and right plastic tabs to lock the drawer box
in place.
Repeat for remaining drawer.
CAUTION
DO NOT force drawer or damage to glide
may occur. If drawer does not slide in with
ease, remove and try again from the start.
3
A
B
allenandroth.com