Dimensions Guide

3
INSTALLATION INSTRUCTIONS
1. Prior to moving vanity (A) to its desired
location, remove drawers preassembled in
vanity (A) by
fully extending the drawers.
Then locate plastic tabs on metal glide tracks
at left and right sides of drawer box. To
disengage drawer box from glides, pull out
plastic tabs from glide toward center of
drawer. Then, gently lift drawer up to remove
it from vanity (A).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes (24 hours for adhesive to dry).
Tools Required for Assembly (not included): Phillips screwdriver, utility knife or scissors,
adhesive, power drill with drill bit
Helpful Tools (not included): Measuring tape, level
1
1
A
B
allenandroth.com