welcoming • sophisticated • inspiring ITEM #0731965 allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. VANITY WITH TOP MODEL #1026VA-30-205 Français p. 8 ATTACH YOUR RECEIPT HERE Serial Number Español p. 15 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 8 p.m., EST, Monday - Friday. EB16161 allenandroth.
PACKAGE CONTENTS B C PART DESCRIPTION QUANTITY A B Vanity Top (preassembled to Vanity (A)) Backsplash 1 1 C 1 A HARDWARE CONTENTS AA Touch-up Pen Qty. 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Some steps are more easily handled with two adults. CAUTION • DO NOT try to pry off top from vanity. Damage to top or vanity may occur.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20-30 minutes (24 hours for adhesive to dry). Tools Required for Assembly (not included): Phillips screwdriver, utility knife or scissors, adhesive, power drill with drill bit Helpful Tools (not included): Measuring tape, level INSTALLATION INSTRUCTIONS 1.
INSTALLATION INSTRUCTIONS Note: Clean area where the vanity (A) will be permanently located prior to beginning installation, ensuring the vanity (A) will not interfere with any water supply and drain lines once mounted. 2 2. With two people, carefully place vanity (A) with location. top (B) against the wall in its Find and mark locations of wall studs behind the permanent location of vanity (A). B Note: Use preassembled levelers on legs of vanity (A) to level the item.
INSTALLATION INSTRUCTIONS 4. If you need to adjust the doors, do so in the following manner. To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws. To adjust door left or right, turn screws (b) on both hinges, in or out. To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws. 4 2 2 2 2 2 2 a 1 a 3 b 1 1 5. Apply adhesive (not included) to unpolished side and bottom of backsplash (C).
CARE AND MAINTENANCE • • • • Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product. You can clean the vanity with a gentle, non-abrasive household cleaner. Make sure to dry the wood immediately with a soft cloth or towel. The stone top can be cleaned using standard marble cleaning agents available at your local supplier. • Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess colorant promptly with a soft cloth.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.
