User Manual

Allen & Heath 11 ZED-10 User Guide
EQ:
The ZED-10 and ZED-10FX mixers are equipped with a 3-band equaliser circuit on each
mono input, with swept mid frequency section, and a 2-band EQ on the stereo channels. The
frequency and response of each has been carefully chosen to give the maximum performance
when using the EQ on a variety of sources.
Record Bus:
A separately switched stereo bus can be routed to from any channel creating a selective
recording bus, monitoring bus or stereo clean feed output. You can even route just the ef-
fects processor output to this bus and use the mixer as a high end effects unit.
USB:
Getting audio to and from a computer easily is now a common requirement for live sound
and music production. The way we have implemented this on ZED is super-flexible and su-
per-easy! No longer do you need to fiddle around the back of your computer to get to the
soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead
to your ZED, select the USB routing on the mixer and the device on your computer and
that’s it! CD quality audio to and from your PC or MAC.
Internal power supply:
Not a “wall wart” - a proper built in power supply specifically designed and based on totally
reliable technology.
INTRODUCTION TO THE ZED-10