User guide

XONE VF-1 User Guide 23
Using MIDI to Connect a Sequencer or Effects Controller
By connecting the XONE VF-1 to an external sequencer you can record and replay filter sweeps and settings changes.
Connect the MIDI Out from the VF-1 to the MIDI In of a sequencer and the MIDI In on the VF-1 to the MIDI Out of the
sequencer. Configure MIDI Thru on the sequencer to echo MIDI Input to MIDI output. Now make sure that the Local OFF
switch on the rear-panel is selected so that the VF-1 will respond to MIDI In messages.
VF-1
16