User guide

22 XONE VF-1 User Guide

Using MIDI to Link VF-1 Units

For more dramatic effects two XONE VF-1 units can be connected together to make a stereo 24dB/Octave

system. Connect a MIDI cable from the MIDI Out of the first VF-1 (master) to the MIDI In of the second (slave).

Press in the rear-panel Local Off switch on the slave to allow it to respond to MIDI In messages. The slave VF-1

will now follow the filter type, cut-off frequency and filter on/off settings of the master. Switch both the master

and the slave to MONO using the rear-panel switch on each. Now route one channel through the master and

the second channel through the slave.

VF-1