User guide

XONE VF-1 User Guide 21
Setting the MIDI Channel Number
The MIDI channel number and mode settings on the XONE VF-1 are adjusted using power-up menus. These
are accessed by holding down buttons while applying power to the unit. We advise that you turn the amplifiers
off and remove the VF-1 from the audio signal path while changing MIDI settings to avoid unexpected sounds
being generated.
1. Hold down the Hi-pass filter button whilst switching on the
power to the VF-1. All three of the filter type indicators will light.
2. Release the Hi-pass button. The current MIDI channel number
will be displayed encoded on the front panel lights (see table).
3. Press the High-pass button repeatedly to cycle through MIDI
channels 1 to 16.
4. To store the selected MIDI channel and continue with normal
operation press the Filter ON button.
X = light off, O = light on
MIDI Ch Hi-pass Band-pass Low-pass Filter ON
1 X X X X
2 X X X O
3 X X O X
4 X X O O
5 X O X X
6 X O X O
7 X O O X
8 X O O O
9 O X X X
10 O X X O
11 O X O X
12 O X O O
13 O O X X
14 O O X O
15 O O O X
16 O O O O
LOW-PASSBAND-PASSHI-PASS FILTER ON