User guide

10 XONE VF-1 User Guide
Hi-Pass
Turn on the high-pass filter to progressively remove low
frequencies below the cut-off selected using the VCF
FREQUENCY control [12]. The switch illuminates when the hi-
pass filter is active. The diagram shows the response as the
frequency control is rotated. It also shows the boost around the
cut-off frequency when resonance is increased.
Band-Pass
Turn on the band-pass filter to progressively remove frequencies
above and below the cut-off selected using the VCF FREQUENCY
control [12]. The switch illuminates when the band-pass filter is
active. The diagram shows the response as the frequency control
is rotated. It also shows the boost around the cut-off frequency
when resonance is increased.
Lo-Pass
Turn on the low-pass filter to progressively remove high
frequencies above the cut-off selected using the VCF
FREQUENCY control [12]. The switch illuminates when the low-
pass filter is active. The diagram shows the response as the
frequency control is rotated. It also shows the boost around the
cut-off frequency when resonance is increased.
11
10
9
10k20 1kHz100 20k
0dB
+5
+10
+15
+20
-5
-10
-15
-20
HI-PASS FILTER
LO
HI
BAND-PASS FILTER
LO
HI
10k20 1kHz100 20k
0dB
+5
+10
+15
+20
-5
-10
-15
-20
10k20 1kHz100 20k
0dB
+5
+10
+15
+20
-5
-10
-15
-20
LO-PASS FILTER
LO
HI