User guide

Allen & Heath 12 XONE:S2 User
PHONO / LINE INPUT CHANNEL
7
8
7
Channel Fader
A high quality, 45mm smooth travel dual-rail fader or
rotary potentiometer adjusts the channel signal level
from fully off to fully on.
8
XFade Switch
Used to assign the channel to either the X (left) or Y
(right) side of the cross-fader. Works in conjunction
with the XFADER On switch in the master section.
A bi-colour LED indicator illuminates either red (X) or
yellow (Y) to show which side of the cross-fader has
been selected.
6
Channel Meter
Displays the channel signal level. It is pre-EQ and pre-
fader, allowing the input level to be displayed even if the
EQ is set to off on all bands. To view the post EQ level,
press the cue switch and use the mix/monitor meters.
The channel level control should be set so that the me-
ter averages around ‘0’ with loudest peaks no higher
than ‘+6’. Turn down the level control if the +10 peak
indicator lights.