User guide

Allen & Heath 10 XONE:S2 User
MIC / LINE INPUT CHANNEL
7
8
7
Channel Fader
60mm smooth travel fader adjusts the channel signal
level from fully off to fully on.
8
Mic On Switch
Press the Mic switch to send the channel audio to the
mix. When selected, the LED indicator switch will illu-
minate yellow and the monitor output will be automati-
cally ducked by –15dB.
The Mic On switch has two operating modes—single
press or press and hold. When the switch senses a sin-
gle press it will latch the channel on, when it senses a
press and hold it will turn the channel off when the
switch is released. This operation is ideal for making
short announcements.
6
Channel Meter
Displays the channel signal level. It is post EQ and pre-
fader. This means it is not affected by the fader position.
The channel level control should be set so that the me-
ter averages around ‘0’ with loudest peaks no higher
than ‘+6’. Turn down the level control if the +10 peak
indicator lights.
6