User Manual

ALLEN&HEATH 17 AP10733_1_XONE:PX5 User Guide

MASTER SECTION

MIX / Monitor Meters

The main meters follow the selected monitor source.

The default display is the mix level, pre-master level,

which is overridden with an input channel level if the

channel cue switch is selected.

In SPLIT cue mode, the left (L) MIX meter displays the

cued channel signal level and the right (R) MIX meter

displays mix bus levels. Cued MIX audio level is pre-

MASTER, to prevent mismatch due to position of the

MASTER level control.

NOTE:

The mixer should be operated with meters averaging

around 0 and loudest peaks between +6 and +9.

If the ! indicator lights, ensure GAIN or EQ settings are

not clipping Channel meters and, if necessary, turn

Channel GAIN, EQ, or FADERS down to prevent LR

MIX meters clipping.

For more information, please refer to the Operating

Levels section on page 47.

MASTER Level Control

A rotary MASTER control adjusts the level of the main,

MASTER 1 and MASTER 2, rear panel outputs feeding

the house sound system.

This does not affect BOOTH output level or the meters.

BOOTH Level Control

Adjusts the level of the signal to the stereo BOOTH

RCA output. This does not affect the headphones level.

BOOTH output can be used for a DJ Booth monitor, or

as an additional zone feed or recording output.

EXT RTN Level Control

Adjusts the level of audio input from effects hardware

connected via FX SEND / EXT RTN and routed to the

XONE:VCF or LR MIX outputs.