User guide

34 XONE:92 User Guide
Specifications
0dBu = 0.775 Volts rms, +4dBu = 1.23V rms 0dBV = 1 Volt rms, -10dBV = 316mV rms
Max output level MIX 1 +22dBu into 47 ohm
MIX 2 +20dBu into 47 ohm
AUX +21dBu into 47 ohm
REC +11dBV into 600 ohm
Internal headroom Channels +22dB
Freq response +/-0.5dB 5Hz to 30kHz
Distortion < 0.003% THD+noise @1kHz
Crosstalk > -93dB Inter-channel
MIC EIN 22-22kHz -126dB 150 ohm source
Residual noise MIX 1 -99dBu
MIX 2 -106dBu
AUX -90dBu
BOOTH -106dBu
REC -96dBu
Mix noise MIX 1 -88dBu (-90dB S/N)
MIX 2 -90dBu (-88dB S/N)
AUX -88dBu (-86dB S/N)
BOOTH -89dBu (-87dB S/N)
REC -96dBu
Channel meters Peak reading 9 led
-20 to +10
Dimensions and Weights
The console is fitted with rubber feet for desktop operation. A screw on rack ear kit is included for
rack or plinth mounting.
Width Height Depth Weight
Desktop 320 mm (12.6”) 87.6 mm (3.5”) 358 mm (14”) 6 kg (13 lbs)
Rack ears fitted (1) 370 mm (14.6”) 87.6 mm (3.5”) 358 mm (14”)
Rack ears fitted (2) 482 mm (19”) 87.6 mm (3.5”) 358 mm (14”)
Packed 470 mm (18.5”) 210 mm (8.3”) 400 mm (15.7”) 8 kg (18 lbs)
Rack Ears
Allow permanent fixing in a plinth or rack system. Rack Ears bolt on to the sides of console in three
orientations. Ensure air vents are not obstructed. Fix in place using M6 screws or bolts.
Main meters Peak reading 9 led
-20 to +10
Mic EQ 4-Band +/-15dB
100, 250, 2.5k, 10kHz
Music EQ 4-Band +6dB / -30 (Mids)
Infinity (12dB/Oct) LF/HF
250,350, 2k, 2.5K
Ch fader 60mm stereo or rotary VCA
Mix 1 & 2 faders Rotary
Crossfader 45mm stereo VCA
Replaceable
Filters Dual stereo VCF
Analogue
Panel Steel
PSU Internal switch mode
Mains In 3 pin IEC socket
Power Lead Country dependant
AC mains 110 to 240V AC @ 47/63Hz
Consumption 30W max
Fuse rating 100-240V AC T500mAL
Can be fitted
two ways:
Either flange
flush with
top panel or
flush with
underside of
chassis.
370 with rack ears fitted
320
117
120
348 rack ear fixings
11
Rack ear fixings
87.60
358.00
482 with rack ears fitted
465.2 rack ear fixings
37.30 101.60 76.20 101.60
8.40