Weights and Dimensions

MixWizard

Free Standing

The console is supplied ready for free standing operation with its side trims fitted and connector pod positioned

for rear access. If you are converting from rack to free standing then make sure the pod is correctly rotated and

secured, and the side trims fitted as shown:

19” Rack Mount

For rack mounting, remove the two side trims and rotate the pod into the connector position preferred. Allow

enough space for the cables and connectors behind the console.

Do not transport the console with its connector pod securing screws removed. Do not attempt to

remove the connector pod from the console. Do not obstruct the ventilation slots. Allow adequate

space around the console for air flow. If the side trims are to be removed, do not refit their fixing screws

to the unit. Retain and store these in case the trims need to be refitted in the future.

194

514

530

ROTATE POD AND REFIT SECURING SCREWS

RELEASE M4 POZI SCREW EACH SIDE

FIT SIDE TRIMS - 4x M4 POZI SCREWS PER SIDE

CONSOLE WIDTH = 507mm

101.6165.1101.637.7

482.6 (19" RACK)

444

(10U)

193

497

(11.2U)

SECURE I N RACK USI NG 8x M6 BOLTS

USE PLASTIC CUP WASHERS TO PROTECT THE PANEL

122

193

Weights

16:2 unpacked 13kg / 28lb

16:2 packed 16kg / 35lb

12:2 unpacked 11kg / 24lb

12:2 packed 14kg / 31lb

14:4:2 unpacked 13kg / 28lb

14:4:2 packed 16kg / 35lb