User Manual

Qu Mixer Reference Guide 81 AP9372 iss.8
14. iOS Apps for Wireless Control
Two Qu apps are available from the Apple Store: Qu-Pad - Engineer’s live mixing control
Qu-You - Musician’s personal monitor control
Qu-Pad is an engineer's mixing tool giving you the freedom to
walk the room or stage and control the sound right where it is
needed. Qu-Pad gives you control of the live mix. It is not for full
system setup which can be accessed at the mixer. Qu-Pad and
the Qu console can work together to provide simultaneous control
of independent functions, for example one engineer using the
console to mix front-of-house sound, and another using the iPad
to mix monitors on stage.
Qu-Pad runs on all models of iPad running iOS7.1 or higher. The
current version tested at the time of this release is iOS8.
Current firmware supports up to two iPads running Qu-Pad and up to 8 iPhones, iPads, iPod Touch or
Android devices running the Qu-You monitor app. The maximum number of devices is 8.
Functions available:
 Fader levels, mutes, pan
 Aux and FX sends, routing and Pre/Post switching
 Group masters and routing (not Qu-16)
 Matrix masters (not Qu-16)
 Input Preamp/dSNAKE/USB selection
 Preamp Gain, Pad, Polarity and 48V
 Insert switching and channel linking
 HPF, Gate, PEQ, GEQ, Comp, Delays
 FX parameters, Libraries and Tap Tempo
 Mix routing and source options
 Group mode select
 Matrix sends and routing
 Output balance
 Mute Groups
 DCA Groups
 SoftKeys and assignment
 Scenes and Libraries
 RTA function
 PAFL select
 Signal Generator
 Talkback
 Full signal metering
 Custom strips for personalised channel layout
 Channel naming (stored in the Qu mixer)
Setup functions not available:
 FX patching
 Output patching
 Show memory store and load
 Scene Recall Filters and Safes edit
 Copy/Paste/Reset of parameters
 System configuration, options and preferences
LR mix selected, CH preamp shown
CH PEQ shown
Custom Layer setup