Data Sheet

Qu-Pac Technical Datasheet 5 Allen & Heath Ltd
Mixer Specification
Inputs
Control
Mic/Line Inputs
Balanced, XLR and 1/4" TRS jack, fully
recallable
Touch Screen
5" TFT, 800x480 resolution
Input Sensitivity (XLR / TRS)
-60 to +5dBu / -50 to +15dBu
SoftKeys
10
Analogue Gain
-5 to +60dB, 1dB steps
Mute Groups
4
Maximum Input Level (XLR /
TRS)
+19dBu / +29dBu
DCA Groups
4
Input Impedance (XLR / TRS)
>5kΩ / >10 kΩ
Network
TCP/IP Ethernet for MIDI and iPad app
THD+N, Unity gain 0dB
0.0005% -89 dBu
(20-20kHz, Direct Out @0dBu 1kHz)
THD+N, Mid gain +30dB
0.001% -83dBu
(20-20kHz, Direct Out @0dBu 1kHz)
Input Processing
Stereo Line Inputs
Source
ST1, ST2 connector
Balanced, 1/4" TRS jack, half normalled
CH1-32
Local, dSNAKE, or USB
ST3 connector
Unbalanced, stereo 3.5mm Mini Jack
ST1, ST2
Local, dSNAKE, or USB
Input Sensitivity (ST1, ST2 /
ST3)
Nominal +4dBu / 0dBu
ST3
Local, dSNAKE, or USB Stereo
Trim
+/-24dB
USB Global Source
Qu-Drive or USB B Streaming
Maximum Input Level
(ST1,ST2 / ST3)
+22dBu / +18dBu
Input Impedance
>7kΩ
Stereo Linking
Odd/even input pairs
Parameters linked
EQ, dynamics, insert, delay,
assignments, sends
Outputs
Link options
Preamp, polarity, sidechains,
fader/mute, pan
Mix1-10 and LR Out
Balanced, XLR
Polarity
Normal/Reverse
Group and Matrix Out
High Pass Filter
12dB/octave 20Hz – 2kHz
Output Impedance
<75Ω
Insert
Assign FX1-4 into Input channels
Nominal Output
+4dBu = 0dB meter reading
Delay
Up to 85ms
Maximum Output Level
+22dBu
Residual Output Noise
-90 dBu (muted, 20-20kHz)
Gate
Self-key Sidechain
Threshold / Depth
-72dBu to +18dBu / 0 to 60dB
Stereo Alt Out & 2Trk Out
Balanced, 1/4" TRS jack
Attack / Hold / Release
50us to 300ms / 10ms to 5s / 10ms to 1s
Source (Alt Output / 2Trk
Output)
Patchable / LR post-fade
Output Impedance
<75Ω
PEQ
4-Band fully parametric, 20-20kHz, +/-
15dB
Nominal Output
+4dBu = 0dB meter reading
Band 1
Selectable LF Shelving (Baxandall), Bell
Maximum Output Level
+22dBu
Band 2, Band 3
Bell
Residual Output Noise
-90 dBu (muted, 20-20kHz)
Band 4
Selectable HF Shelving (Baxandall), Bell
Bell Width
Non-constant Q, variable, 1.5 to 1/9th
octave
AES Digital Output
2 channel, 48kHz sampling rate, XLR
2.5Vpp balanced terminated 110Ω
Compressor
Self-key Sidechain
dSNAKE
Threshold / Ratio
-46dBu to 18dBu / 1:1 to infinity
Inputs
Remote source for CH1-32, ST1, ST2,
ST3
Attack / Release
300us – 300ms / 100ms - 2s
Outputs
Patchable from Mix1-10, LR, Grp1-8,
MTX1-4
Knee
Soft/Hard
Compatible with AudioRacks AR2412,
AR84, AB168
Types
Peak Manual, RMS Manual, SlowOpto,
PunchBag
Compatible with ME personal mixing
system
System
Measured balanced XLR in to XLR out,
0dB gain, 0dBu input
Mix Processing
Dynamic Range
112 dB
Channel Direct Out to
USB
Follow Fader, follow Mute (global
options)
Frequency Response
+0/-0.5dB 20Hz to 20kHz
Source select (global)
Post-Preamp, Pre-EQ, Post-EQ, Post-
Delay
Headroom
+18dB
Internal operating Level
0dBu
Insert
Assign FX into Mix channels
dBFS Alignment
+18dBu = 0dBFS (+22dBu at XLR
output)
Delay
Up to 170ms
Meter Calibration
0dB meter = -18dBFS (+4dBu at XLR
out)
Meter Peak indication
-3dBFS (+19dBu at XLR out), multi-point
sensing
GEQ
Constant 1/3 oct, 28 bands 31Hz-16kHz,
+/-12dB Gain
Meter Signal indication
-48dBFS (-26dBu at XLR out)