Operation Manual

Qu-16 User Guide 25 AP9031 iss.3
6.11 Working with the sends on faders:
 Select a Mix - Press a Mix key. The master strip presents the
mix fader and controls. The 16 channel faders move to
present the sends to that mix.
 Adjust Send levels – Move the channel faders. These
become the sends to the selected mix.
 Adjust Send pans - While a stereo mix is selected, press a
channel Sel key and use the Pan control to pan its send in
the mix.
 Assign sends to the mix – Hold the Assign key to view the
current channel assignments (routing) to the mix. The Sel
keys light when the channel is assigned to the mix. To toggle
individual assignments on or off, press channel Sel keys
while holding Assign.
 To toggle all assignments on or off - Hold the Assign key
and press the master strip Sel key.
 Set sends Pre or Post fader - Hold the Pre Fade key to view
the current channel pre/post fade settings for the mix. The Sel
keys light when set to Pre-fade. To toggle individual sends
pre or post, press the channel Sel keys while holding Pre
Fade. It is typical to use Pre-fade for monitor sends and Post-
fade for effects sends.
 To toggle all sources Pre or Post Fade - Hold the Pre Fade
key and press the master strip Sel key.
 Press the Mix key again or press LR to return to the main
mix, or press another Mix key to adjust a different mix.
Note Always remember to return to the main LR mix once you
have finished adjusting monitor or effects levels.
Sends on faders
Pre/Post
Assign
Toggle individual sources Toggle all sources Hold and then press Sel