User guide

10 iPS10 User Guide
Technical specification
Technology Switched mode with power factor correction
Mains input IEC connector
Mains voltage 85 to 250V AC, 47 to 63 Hz ~
Power consumption 320W max
Mains fuse T5AL 250V 20mm.
DC voltage rails +8, +18, -18, +24, +57 V DC
DC output 10-pin female circular chassis mounted socket
Temperature sense RJ45 connector
DC cable 2.8m multicore male to female. A&H part number 003-576
Temperature cable 2.8m CAT5 RJ45. A&H part number AH6831
Protection Under voltage detection and thermal sensing
Cooling Fan assisted. Thermal shutdown at 85 degrees C
Installation 2U rack mount (integral ears) or free standing (plastic feet fitted)
Dimensions Rack mounted 482 x 310 x 88mm (2U) 19” x 12.2” x 3.46”
Free standing 482 x 310 x 92mm (including feet) 19” x12.2” x 3.6”
Minimum clearance at rear for connectors 64mm (2.5”) min
Packed 580 x 510 x 210mm 22.9” x 20” x 8.3”
Weight Unpacked 7 kg (15.4 lbs)
Packed 8.5 kg (18.7 lbs)
310 mm / 12.2"
374 mm / 14.7"
443 mm / 17.4"
2U
88 mm / 3.46"
482 mm / 19"