User guide

iLive Fixed Format Getting Started Guide 9 AP7141 iss.6b
iLive-R72 Control layout
Channel Processing Select Press this
key to access the processing for the
selected channel using the
TouchScreen. Controls for the preamp,
EQ, dynamics, delay and insert setup are
presented. Use the touch controls and
screen rotary to adjust the parameters.
TouchScreen keys When these keys are off the
screen displays system status. When these keys are
off and a strip SEL is active the screen presents the
associated channel processing. Use these keys to
access system setup and memory management.
These override the channel processing view.
Fader Banks Two
independent groups of fader
strips with 6 layers each.
Provides control of the Input
channel, FX return, Mix master
or DCA assigned to it.
SEL opens the channel
processing for the selected strip
in the TouchScreen.
MIX presents the sends for the
selected strip on faders (or
encoders) and assignments
and pre/post settings in the
strip LCD windows.
Soft Keys 8 user assignable keys
Virtual write-on strip Name,
colour and mix status
Talkback Hold down TB ASSIGN and
press master MIX keys to assign.
Copy/Paste/Reset edit keys
Hold down then press a SEL or MIX
key to copy or reset parameters.
Dimmer
Scene GO recall
keys. These are
disabled by default.
Use the SURFACE
Preferences option
to enable.
SCENE SAFES to
prevent selected
channels being
overwritten by the
memories. Hold
down SAFES and
press MIX keys to
toggle on or off.
ASSIGN and PRE/POST access
keys for the selected mix.
While a MIX is active:
Hold down ASSIGN and press
strip MIX keys to toggle the
assignments on or off. To assign
all use the master MIX key.
Hold down PRE/POST and press
strip SEL keys to toggle pre or
post fade. To assign all use the
master SEL key.
Hold down ROTARY SHIFT to
access the second encoder
function if it has one.
Hold down ALT VIEW to
view the channel or
socket numbers instead
of name in the LCDs.
You can choose to
access GAIN using the
strip rotaries while the
key is pressed.
GEQ FADER FLIP to
present the GEQ across
the faders.
FREEZE IN LAYERS to
keep a channel visible
across all layers. Hold
down and press strip
MIX keys.
VGA port for external
monitor (same view as
TouchScreen).
2x USB ports.
Plug your USB key in here.
Local PAFL
monitor output
Assignable local audio inputs and outputs.
Row A = inputs. Row B = outputs.
Balanced TRS jack line level
RCA phono line level
RCA digital (SPDIF)
Surface to MixRack link
ACE (audio and control over
Ethernet) CAT5 cable up to
120m (400 feet)
Additional Ethernet ports for connecting
laptops and wireless router.
MIDI in
and out
Lamp socket
IEC mains power input.
Plastic clip to secure
power cable.
TouchScreen rotary control.
Illuminates orange when it is active.
Headphones level control
CLEAR ALL PAFL Press once to
clear any active Input PAFL. Press
again to clear Output PAFL.
Input PAFL overrides Output PAFL.
Talkback Mic Input and level trim.
Recessed switch to select 48V
phantom power.
System hard
reset jumpers
*Refer to www.allen-heath.com
for recommended cable types
and maximum lengths.