User Manual

SQ-5 Technical Datasheet 4 Allen & Heath Ltd

Input and output channel processing and parameters

in the mixer shall be saved on demand as a user

library item for recall in other channels. All library items

shall be archived with the show-file. Library items shall

be transferrable to USB drive as portable data to be

used in other systems.

The mixer shall provide the facility to save 300 scenes

of the settings of the mixing system and these scenes

shall be nameable.

A comprehensive table of ‘Scene Safes’ shall be

provided to prevent selected items from being

changed from their state when the safe was enabled.

A comprehensive scene filter shall be provided per

scene to Allow / Block each parameter saved in a

scene from being changed as that scene is recalled.

An option shall be provided for password protection

for log-in of several users with different levels of

system access and permissions. A particular scene

may be chosen to be recalled per change of user-

The mixing system shall periodically record all current

settings and return the mixer to that state after reboot

following a power-cycle.

The mixing control surface shall have a built in power

supply accepting AC mains voltages of 100~240V,

50/60 Hz, 75W max via an earthed 3-pin IEC male

connector mounted on the rear chassis. A Two Pole

Push-Button switch shall be provided near the mains

input.

Recommended operating temperature for the mixer

shall be 5 to 35 degrees Celsius.

The mixer shall be the Allen & Heath SQ-5.

Dimensions

514.9mm/20.3"

381.6mm/15"

198mm/7.8"

60.4mm/2.4"

440.00mm/17.3"

352.00mm/13.9"

501.9mm/19.8"