User Manual

AR2412 – 24 inputs, 12 outputs AudioRack with dSNAKE connection and expansion port for personal monitoring.
AR84 – 8 inputs, 4 outputs AudioRack with dSNAKE connection.
AH7000 – 80m drum of Neutrik EtherFlex Cat5 with locking connectors.
AH8721 – 120m drum of Klotz Cat5 with locking connectors.
LEDLamp – variable brightness 18” gooseneck lamp.
QU-16-RK19 – Rack mounting kit.
Accessories
Qu-Pad
Add the Qu-Pad iPad app to your Qu-16 setup and you’re
free to adjust the monitors on stage, roam around the
venue whilst tweaking the PA, and then mix the show from
the heart of the audience. Qu-Pad connects to the mixer
over Wi-Fi* and gives instant access to all live mixing
parameters and settings.
*Requires*Requires the connection of a Wi-Fi router or access point to the Qu-16
Network port.
ME Personal Mixing System
Qu-16 is fully compatible with our ME Personal Mixing
System. Any number of ME-1 personal mixers can be
chained from the dSNAKE port (or from an AR2412
Stagebox if you’ve got one connected to the dSNAKE port).
Each performer can be given tailored control over their own
mix, leaving the engineer free to focus on the audience
experience. Find out more at allen-heath.com/ME
Qu-16 is a self-contained mixer, so if you’ve already got the
analogue cables you’re good to go. If you’re thinking of
trading in the copper multicore for a Cat5 digital snake,
Qu-16’s dSNAKE port has you future-proofed, allowing
connection to a remote AR2412 or AR84 Stagebox.
dSNAKE is our proprietary networking solution, boasting a
transport latency of only 105us over cable runs of up to
120m
120m / 390’. So if you’re mixing FoH you can place your I/O
on the stage and run a single Cat5 cable back to the Qu-16
in the mix position.
dSNAKE