User Manual

Allen & Heath 31 ZED-R16 User Guide
MODES OF OPERATION
IN LINE MULTITRACK RECORDING AND MONITORING
The signal for recording is send pre EQ (it can be post EQ if the DIG SND = post EQ switch is pressed) and the
track can be monitored by pressing the DIG RET = post EQ configuration switch. Using this mode emulates the tra-
ditional method of monitoring from the replay head of a tape machine which is a reliable way of monitoring what is
being recorded.
ADC
ANALOGUE SIGNAL
DIGITAL SIGNAL
(FIREWIRE OR ADAT)
PRESS DIG RETURN = POST EQ
ANALOGUE MIX
DAC
Select the inputs to the tracks in the DAW to
be the required channels from ZED R 16.
Select the track outputs to go to the corre-
sponding ZED R 16 channels for monitoring.
Analogue signal converted to digital after the Pre-amp
and sent to the FireWire Bus or ADAT output.
Digital input from FireWire
or ADAT is converted to
analogue and sent to the
channel path after the EQ.