User Manual

Allen & Heath 29 ZED-R16 User Guide
MODES OF OPERATION
ADC
ANALOGUE SIGNAL
DIGITAL SIGNAL
(FIREWIRE OR ADAT)
PRESS DIG SEND = POST EQ
ANALOGUE MIX
RECORDING POST-EQ FROM AN ANALOGUE MIX
If the DIG SEND = POST EQ switch is pressed then the digital output from the channel will be sourced from after
the equaliser. Use this mode if you want to use ZED-R16 as an analogue mixer and want to EQ the signal being re-
corded.
The ZED-R16 channel EQ can be used to
equalise the signal being recorded.
Analogue signal converted
to digital after the EQ and
sent to the FireWire Bus or
ADAT output.