User Manual

Allen & Heath 28 ZED-R16 User Guide
MODES OF OPERATION
RECORDING PRE-EQ FROM AN ANALOGUE MIX
The basic mode for ZED-R16 with all the configuration switches in the up position (not pressed). ZED-R16 can be oper-
ated as a traditional analogue mixer, using the main L-R mix as a stereo monitor mix for the multitrack recording, or as a
PA mix if working live. A clean recording feed will be sent on the FireWire bus or the ADAT outputs for recording each
channel, sourced from just after the pre-amp and hi-pass filter.
ADC
ANALOGUE SIGNAL
DIGITAL SIGNAL
(FIREWIRE OR ADAT)
ALL UP
ANALOGUE MIX
The clean pre-eq channel signal is avail-
able to record either in a Digital Audio
Workstation or by using recording equip-
ment equipped with ADAT inputs.
Analogue signal converted to digital after the Pre-amp
and sent to the FireWire Bus or ADAT output.
Analogue signal continues
through channel path to fader &
routing.